TURNING AND STATISTICAL ANALYZER CUTTING TOOL
DOI:
https://doi.org/10.48047/resmil.v11i1.10Keywords:
.Abstract
One of the most frequent requests from clients when machining a variety of materials is to have the surface finish finished. Consequently, controlling the required surface quality throughout the turning process depends heavily on the availability of better cutting settings.
One of the most basic machining processes used in production is the turning process. Numerous elements impact the turning process, such as the cutting depth, feed rate, cutting conditions, geometry of the tool, and speed of cutting.One of the hardest things about machining is getting the machined piece to have the proper surface quality. This is due to the fact that a technique's parameters, whether directly or indirectly, have a significant influence on quality. On the other hand, the procedure parameters are significantly influenced to differing degrees by distinct replies. Here, we're trying to increase the device's strength by applying various weights and seeing how it reacts
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 RES MILITARIS
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.